Описание

  • Image processing functions
  • MultiCore technology
  • OCR reading
  • Pattern matching
  • Reading of printed and directly marked 1D and 2D codes
The smart camera weQube is based on the wenglor MultiCore technology and combines the function of the scanner and the vision sensors. Therefore, this product allows to capture all established 1D codes and various 2D code types. Autofocus, region of interest and tracking ensure reliable and stable image recording. The following image processing modules are available: Dimensional accuracy check, sorting procedures, presence control, object counting, position output, pixel counting, optical character recognition, pattern matching, filter options, and statistics evaluation.
Working Range ? 20 mm
Resolution 736 ? 480 Pixel
Image Chip color
Light Source White Light
Service Life (T = +25 °C) 100000 h
Visual Field see Table 1
Frame Rate 15 Hz
Electrical Data
Supply Voltage 18...30 V DC
Current Consumption (Ub = 24 V) < 200 mA
Response Time 66 ms
Temperature Range -25...55 °C*
Inputs/Outputs 6
Switching Output Voltage Drop < 2,5 V
Switching Output/Switching Current 100 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Interface RS-232/Ethernet
Protection Class III
Mechanical Data
Setting Method Ethernet
Housing Material Aluminum
Degree of Protection IP67
Connection M12 ? 1, 12-pin
Type of Connection Ethernet M12 ? 1, 8-pin, X-cod.
Safety-relevant Data
MTTFd (EN ISO 13849-1) 227,7 a
General Data
Web server yes
Function
Presence Check yes
Pixel Comparison yes
Reference Image Comparison yes
Tracking yes
OCR yes
Object detection yes
Dimensional accuracy check yes
1D and 2D code reading yes
Pattern matching yes
Output
Configurable as PNP/NPN/Push-Pull yes
Switchable to NC/NO yes
Illumination Output yes
RS-232 Interface yes
Ethernet yes
Display brightness may decrease with age. This does not result in any impairment of the sensor function.* -25° C: Ambient conditions should not result in condensation, avoid the formation of ice on the front panel!55° C: Continuous illumination at max. 1% or flash mode at 100% brightness with an exposure time of ? 5 ms, may affect the service life of the product.''